-40%
Strike Industrie GEN 5 for GL0CK 19 23 MAGWELL Black Works W/ New EMP Extension
Strike Industrie GEN 5 for GL0CK 19 23 MAGWELL Black Works W/ New EMP Extension
Strike Industrie GEN 5 for GL0CK 19 23 MAGWELL Black Works W/ New EMP Extension
Strike Industrie GEN 5 for GL0CK 19 23 MAGWELL Black Works W/ New EMP Extension
Strike Industrie GEN 5 for GL0CK 19 23 MAGWELL Black Works W/ New EMP Extension
Strike Industrie GEN 5 for GL0CK 19 23 MAGWELL Black Works W/ New EMP Extension
Strike Industrie GEN 5 for GL0CK 19 23 MAGWELL Black Works W/ New EMP Extension
Strike Industrie GEN 5 for GL0CK 19 23 MAGWELL Black Works W/ New EMP Extension
Strike Industrie GEN 5 for GL0CK 19 23 MAGWELL Black Works W/ New EMP Extension
Strike Industrie GEN 5 for GL0CK 19 23 MAGWELL Black Works W/ New EMP Extension

Strike Industrie GEN 5 for GL0CK 19 23 MAGWELL Black Works W/ New EMP Extension

$ 11.06

  • Brand: Strike Industries
  • DO NOT OVER TIGHTEN SCREW OR SELF INSTALL WITH OUT ARMORER: YOU WILL DAMAGE SCREW INSERT IF OVERTIGHTEND IMPROPERLY INSTALLED
  • DO NOT USE THE LARGE BACK STRAPS THAT COME WITH THE GUN: ONLY THE +0 BACK STRAP WORKS - FATTER ONES DO NOT
  • DOES NOT FIT 17 FRAMES OR 19X FRAMES WHICH ARE 17 FRAMES: ONLY FITS OEM G19 and G23 GEN 5 FRAMES WITH NO OBSTRUCTIONS
  • DOES NOT FIT THE 19X FRAME: IF YOU HAVE A 19X FRAME YOU NEED A 17 MAGWELL.
  • DOES NOT FIT THE G45 or any Hybrid frame pistols: Do not purchase if you don't have an actual G19 or G23 in GEN 5
  • For Gun Make: GLOCK
  • For Gun Model: Gen 5 19 23
  • For Gun Type: Handgun
  • IF YOUR FRAME IS OUT OF SPEC EXTRA FITMENT IS REQUIRED: TRIMING OR EXPANSION MAY BE NEEDED - NOT FOR 19X MODELS
  • IMPROPER INSTALLATION CAN DAMAGE THIS MAGWELL: GEN 5's DONT HAVE AREAS TO ATTACH IN THE FRONT. FITMENT REQUIRED
  • INCLUDE: MAGWELL AND SCREW ONLY. NOTHING ELSE IS INCLUDED
  • MPN: Glock-Strike-Industries-SI-G5-Magwell-zev-cross, GLOCK
  • MUST BE INSTALLED BY A LICENSED ARMORER OR GUNSMITH: FITMENT & TUNING MAY BE REQUIRED - NO REFUNDS FOR SELF INSTALLS
  • NOT FOR USE WITH GLOCK FATTER BEAVER TAIL PALM GRIPS: ONLY FITS WITH THE +0 FLAT GRIP. MAY REQUIRE MODIFICATIONS
  • SINCE THE GEN 5 FRAME DOES NOT HAVE AN AREA TO ATTACH TO: WE RECOMMEND YOUR GUNSMITH ADD SOME ADHESIVE OR DOULBLE TAPE
  • Specific Part: Magwell for Gen 5 19 23
  • Type: magwell
  • UPC: Does not apply
  • gtin13: Does not apply

Description

100% Authentic Strike Industries Magwell For Glock Gen 5 Models 19 / 23 with +0 Factory Back Strap ONLY. w/ and w/o half-moon cut The Strike Industries GEN5 Magwell for GLOCK™ G19 was designed to provide easier reloading of the magazine while adding SI styling. With the added front lip of the magwell, this SI magwell gives improved grip support. Keeping to the slender factory design of the pistol grip, the benefit of adding a funnel-like magwell to help prevent the dreaded reload bobble outweighs the added material of this SI G5 Magwell. Add consistency and cut fractions of seconds off your reloads now with the Strike Industries GEN5 Magwell for GLOCK™ 19 while comfortably carrying your pistol on your hip or in your waistband. Compatible with most aftermarket magazine base plates and extensions and especially with the SI Extended Magazine Plate (EMP) for GLOCK™ G19. COMPATIBILITY: -GLOCK™ G19/G23 GEN5 w/ and w/o half moon cut -Designed for the GLOCK™ factory +0 backstrap. Bigger GLOCK™ factory or aftermarket backstraps may need to be modified to possibly work at your own risk NOT COMPATIBLE: GLOCK™ 19X Package Contents: -x1 G5 G19 magwell -x1 Metric #4 set screw -x1 2.5mm hex key Product Features: -Flared magwell for easier magazine Insertion -Improved grip support -Ease of installation -Lightweight -High-strength polymer -Perfect pairing with Strike EMP DESIGNED TO WORK IN CONJUNCTION WITH THE STRIKE EMP EXTENSION ON A FACTORY GLOCK MAGAZINE ***THIS ONLY FITS FACTORY GLOCK FRAMES LISTED ABOVE. DOES NOT FIT P80's Gaps are normal due to inconsistencies of Glock Polymer Frames ***NO WEAPONS, MAGAZINES OR MAG EXTENSIONS ARE INCLUDED. PICTURES OF OTHER ITEMS ARE FOR ILLUSTRATION ONLY WARNING: DO NOT OVERTIGHTEN set screw when installing the magwell. Overtightening the set screw will throw the magwell alightment off and also damage the magwell and/or firearm. If you are unsure, please contact our customer support team or consult with your local gunsmith. Since the GEN 5 frame does not have area to attach we recommend your gunsmith use some adhesive in the front or 30lb double sided bonding tape to the inside front lip to the magwell. Your gunsmith will know what to do. FREE US SHIPPING Priority option available for $8.95 *** We recommend you do your own research to know if this will fit your application and other aftermarket items you installed. Colors are proprietary to this manufacturer. They may be close to other brands, but there is never a color match guarantee. Due to buyers unknown skill level we require all parts to be installed by a licensed Glock Armor. Please have your armor contact the manufacture of additional install details and compatibility. Most parts can require some fitment due to unknown tolerances that you posses. No refunds for self installs.